The need to improve information on road user type in National Vital Statistics System mortality data

Objectives: Both the National Vital Statistics System (NVSS) and the Fatality Analysis Reporting System (FARS) can be used to examine motor vehicle crash (MVC) deaths. These 2 data systems operate independently, using different methods to collect and code information about the type of vehicle (e.g., car, truck, bus) and road user (e.g., occupant, motorcyclist, pedestrian) involved in an MVC. A substantial proportion of MVC deaths in NVSS are coded as “unspecified” road user, which reduces the utility of the NVSS data for describing burden and identifying prevention measures. This study aimed to describe characteristics of unspecified road user deaths in NVSS to further our understanding of how these groups may be similar to occupant road user deaths.

Methods: Using data from 1999 to 2015, we compared NVSS and FARS MVC death counts by road user type, overall and by age group, gender, and year. In addition, we examined factors associated with the categorization of an MVC death as unspecified road user such as state of residence of decedent, type of medical death investigation system, and place of death.

Results: The number of MVC occupant deaths in NVSS was smaller than that in FARS in each year and the number of unspecified road user deaths in NVSS was greater than that in FARS. The sum of the number of occupant and unspecified road user deaths in NVSS, however, was approximately equal to the number of FARS occupant deaths. Age group and gender distributions were roughly equivalent for NVSS and FARS occupants and NVSS unspecified road users. Within NVSS, the number of MVC deaths listed as unspecified road user varied across states and over time. Other categories of road users (motorcyclists, pedal cyclists, and pedestrians) were consistent when comparing NVSS and FARS.

Conclusions: Our findings suggest that the unspecified road user MVC deaths in NVSS look similar to those of MVC occupants according to selected characteristics. Additional study is needed to identify documentation and reporting challenges in individual states and over time and to identify opportunities for improvement in the coding of road user type in NVSS.     

Effects of law enforcement and community outreach on mammal diversity in a biodiversity hotspot

Management activities such as law enforcement and community outreach are thought to affect conservation outcomes in protected areas, but their importance relative to intrinsic environmental characteristics of the parks and extrinsic human pressures surrounding the parks have not been explored. Furthermore, it is not clear which is more related to conservation outcomes—the management itself or local people's perceptions of the management. We measured objective (reports by park staff) and subjective (reports by local people) levels of community outreach and law enforcement based on responses to 374 questionnaires. We estimated mammal abundance and diversity of 6 protected areas based on data from 115 camera traps in Xishuangbanna, southwest China, a biodiversity hotspot with high hunting and land-conversion pressures. We then examined correlations among them and found that local people's perception of law enforcement was positively related to the local abundance of 2 large, hunted species, wild boar (Sus scrofa) (β = 15.22) and muntjac (Muntiacus vaginalis) (β = 14.82), but not related to the abundance of smaller mammals or to objective levels of enforcement. The subjective frequency of outreach by park staff to local communities (β = 3.42) and park size (β = 3.28) were significantly and positively related to mammal species richness, whereas elevation, human population density, and subjective frequency of law enforcement were not. We could not conclude that community outreach and law enforcement were directly causing increased mammal abundance and diversity. Nevertheless, the patterns we detected are some of the first empirical evidence consistent with the idea that biodiversity in protected areas may be more positively and strongly related to local perceptions of the intensity of park management than to either intrinsic (e.g., elevation, park size) or extrinsic (e.g., human population density) environmental factors.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

An uptake and elimination kinetics approach to assess the bioavailability of chromium,copper, and arsenic to earthworms (Eisenia andrei) in contaminated field soils

The aim of this study was to determine the bioavailability of metals in field soils contaminated with chromated copper arsenate (CCA) mixtures. The uptake and elimination kinetics of chromium, copper, and arsenic were assessed in the earthworm Eisenia andrei exposed to soils from a gradient of CCA wood preservative contamination near Hartola, Finland. In soils contaminated with 1480–1590 mg Cr/kg dry soil, 642–791 mg Cu/kg dry soil, and 850–2810 mg Ag/kg dry soil, uptake and elimination kinetics patterns were similar for Cr and Cu. Both metals were rapidly taken up and rapidly excreted by Eisenia andrei with equilibrium reached within 1 day. The metalloid As, however, showed very slow uptake and elimination in the earthworms and body concentrations did not reach equilibrium within 21 days. Bioaccumulation factors (BAF) were low for Cu and Cr (< 0.1), but high for As at 0.54–1.8. The potential risk of CCA exposure for the terrestrial ecosystem therefore is mainly due to As.

     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

Analytical mapping of research on disaster management,types and role of ICT during 2011–2018

Catastrophic disasters like earthquake and flood cause widespread destruction and financial devastation. This has brought disaster management into limelight making it a burgeoning academic research field. The remarkable rise of ICT (Information and Communication Technology) has instigated the scientific world to incorporate these technologies in disaster management. This study presents scientometric analysis to identify the status quo of research on the management of various disasters and role of ICT in it. This paper uses bibliographic data retrieved from Scopus for the observation period from 2011 to 2018. We provide extensive insights into growth of publications, citation pattern and their connectedness with other subject disciplines. Furthermore, we identify most productive and influential countries, institutes and journals. Our study analyses co-occurrence of keywords using Visualization of Similarities (VOS) Viewer. This structured overview will enhance the understanding of this field leading to more focussed and purposeful research.     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Trace elements and microbiological parameters in farmed Nile tilapia with emphasis on muscle,water, sediment and feed

Fish may bioaccumulate contaminants from the aquatic environment and extend them to the food chain provoking risks to human health. This study evaluated the microbiological parameters of the pond´s water and trace elements concentrations in samples of water, sediment, feed and muscle of farmed Nile tilapia used for human consumption in southern Brazil. A total of 240 fish were collected from 12 tilapia farms. Sediment, tank water and dry ration used in the animals' diet were collected for analysis. Analysis were performed by Energy Dispersion X-ray Fluorescence (EDXRF), Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Induced Coupled Plasma Optical Emission Spectrometer (ICP-OES), and Atomic Absorption Spectrometer (AAS-VGA). In addition, the microbiological analysis of the water was carried out. The concentrations of Se, I, Fe, Cu and Zn in fish muscle were higher than the recommended by the Brazilian legislation, considering the advised daily intake for adults. The arsenic element had concentrations above the limit stipulated by the present Brazilian legislation, observed in all samples of muscle, sediment and tank water highlighting a possible environmental and fish contamination by the toxic element. Moreover, the arsenic concentration in the water presented a positive correlation (ρ?=?0.33) with arsenic in the muscle, suggesting that tilapia is a good environmental bioindicator, once they properly reflect the levels of arsenic in the water. It is suggested to perform an arsenic speciation for quantification of the inorganic form and accurate assessment of the degree of toxicity in the muscle samples and risks it can bring to human health. Regarding the other potentially toxic elements (Hg, Pb and Cd), and microbiological analysis of water it was verified that the consumption of the fish in question does not raise risks, since the values are within a quality benchmark established by law. The concentration of total and fecal coliforms in pond´s water in the facilities was in agreement with the microbiological indexes required by the legislation of CONAMA class II. Western region presented the lowest concentrations of fecal coliforms when compared to the other regions. There was no significant difference in the microbiological counts of total heterotrophic bacteria, Vibrio spp. and Pseudomonas spp. among the regions.     

The Ratio between Chronographic and Geographic Variation in the Morphofunctional Features of Bank Vole (Clethrionomys glareolus Shreb.) in the South of Its Range

Russian Journal of Ecology - A simultaneous analysis of the chronographic variation of the mandible of bank vole (Clethrionomys glareolus Shreb.) in three longitudinally distant populations that...     

Trauma demography and clinical epidemiology of motorcycle crash–related head injury in a neurosurgery practice in an African developing country

Objective: Though motor vehicle crashes (MVCs) were the main cause of head trauma from road traffic injuries (RTIs), motorcycle crashes (MCCs) are now a major cause of RTI-related head injury (HI) in many developing countries.

Methods: Using a prospective database of HIs from a neurosurgical practice in a sub-Saharan African developing country, a cross-sectional survey was conducted for the trauma demography and clinical epidemiology of this MCC-related HI.

Results: Motorcycle crashes accounted for 57% (473/833) of all RTI-related HIs in this registry. The victims, with a mean age of 33.1 years (SD = 18.3), consisted mainly of males (83.1%), those of low socioeconomic status (>90%), and those aged between 20 and 40 years old (56%). MCCs involved only riders in 114 cases (114/473, 32.1%), of which 69% were motorcycle–motorcycle crashes. The HI was moderate–severe in 50.8%; clinical symptomatology of significant HI included loss of consciousness (92%), anisocoria (35%), Abbreviated Injury Scale head (AIS–head) score > 3 (28%), and CT-Rotterdam score > 3 (30%). Extracranial systemic injury involved the limbs most frequently, with an Injury Severity Score (ISS) >25 in 49%. The fatality rate was 24%.

MCC-related HI among pedestrian victims involved more vulnerable age groups (the young and elderly) but have lower mean ISS compared to motorcycle passengers (mean ISS = 23.5 [11.6] vs. 27.4 [13.0]; 95% confidence interval [CI], 1.27–6.49; P = .004). In addition, compared to a contemporary cohort of MVC-related HIs in our registry, MCC victims were older (mean age 34.8 years [18.0] vs. 30.8 [18.4]; P = .002); had higher proportions of certain extracranial trauma like long bone fractures (71 vs. 29%; P = .02); and suffered fewer surgical brain lesions (25.5 vs. 17.2%; P = .004).

Conclusions: Motorcycle crashes are now a significant threat to the heads, limbs, and lives of vulnerable road users in developing countries.